| Power Supply | Provide DC power adapter interface, support local power supply (DC 5V/3A); (Note: The power adapter is an optional accessory)Support PoE Power over Ethernet (802.3af) | Provide DC power adapter interface, support local power supply DC 48V） Support PoE+/POE Power Over Ethernet | The DC power adapter port supports local power supply (48V DC). The 802.3at power supply is recommended for the power adapter, which can work with the best performance.
If 802.3af is used for power supply, the AP starts up normally, 2.4g works normally, 5g can only work in 2*2 dual-stream mode, ibeacon can work normally, and the LAN3 port and USB port cannot supply power to external devices. | The DC power adapter port supports local power supply (48V DC). The 802.3at power supply is recommended for the power adapter, which can work with the best performance. | Support local power supply, DC 48V/0.6A; (Note: The power adapter is an optional accessory)Support PoE+Power over Ethernet (802.3at) | Local Power Supply (DC 48V/0.6A)Note: DC power adapters should be purchased separately from third-party vendors if needed.PoE（IEEE 802.3af Standard）- Full Spectrum Operation |
| AP Coverage Area(Radius) | Radius 30m(An open environment) | Radius 30m(An open environment) | Radius 30m(An open environment) | Radius 30m(An open environment) | Radius 30m(An open environment) | Circle with 20-meter radiusNote: AP actual coverage is related to AP placement height, this is reference value for 3-meter installation from ground |