Ruijie Community

Title: what's the naming rule of Ruijie switch? [Print this page]

Author: GTAC-Sophia Time: 2021-11-4 17:16
Title: what's the naming rule of Ruijie switch?

Rule:

RG-S[xxxx](C)-[xxGTxxQ/ xxSFP]-(LP/P/HP)-[L/S/E/H]

Explanation: The naming consists of 5 fields. Among them, the "[ ]" is a variable parameter, and the "()" is a parameter that can be omitted according to the specific situation of the product.

Example: RG-S2910C-24GT2XS(/8SFP)-HP-E

Specific meaning

RG: The unified beginning of the naming of Ruijie products

S: indicates Switch

2910: indicates the series of the product

C: Indicates that the product has an expansion slot (if there is no C, it means that it does not have an expansion slot);

24GT: indicates the 24 gigabit electrical ports cured by the product (the number of ports not including the expansion card);

2XS: indicates 2 10 Gigabit optical ports cured by the product (the number of ports not including the expansion card);

/8XX：indicates Number of multiplexed ports (number of ports without expansion card)

(XX----- T： 100M electric port; GT：Gigabit electrical port; SFP：Gigabit fiber port; XT：10 G electrical port; XS：10 G fiber port; QXS indicates 40G fiber port; FC indicates for FC interface)

LP: PoE supply for all downstream ports is not full

P: PoE supply for all downstream ports is full

HP：All downstream ports can be fully supplied with POE+

UP： Some downstream ports have 60W/90W power supply capability

Welcome to Ruijie Community (https://community.ruijienetworks.com/)