Ruijie Community

Title: EG network test is low [Print this page]

Author: GTAC-Sophia Time: 2021-11-4 17:21
Title: EG network test is low

There are three possible reasons for speed test low: 1.Intranet 2.Export EG equipment 3.Operator line.

1. Intranet environment caused

At this time, there may be a loop in the internal network, and wireless speed measurement may not go up, or it may be interference or wireless device performance bottlenecks.

2. Export EG caused.

There are only three possible situations when EG causes problems in speed measurement.

A.EG performance problems, for example, the speed test of EG2000K equipment is about 100M at most, so the limitation of product's performance may cause the test speed not fast.

B.The smart flow control function is turned on. At this time, you can directly turn off the flow control in the web page of EG.

C.The number of sessions is limited. Session limits are set for each IP, which will also affect the speed test results, so delete the test directly

3. Operator line problems

At this time, you can directly connect to the external network for speed test. If the speed still not fast, it is an problem of operator

Welcome to Ruijie Community (https://community.ruijienetworks.com/)