Ruijie Community

Title: How to configure IPsec VPN on Reyee EG? [Print this page]

Author: GTAC-Daisy Time: 2022-2-3 11:19
Title: How to configure IPsec VPN on Reyee EG?

Introduction of IPsec VPN

IPsec VPN is used for Site to Site scenario. For example, three branches of a company are distributed in three different places of the internet. And every branch uses a gateway to establish tunnels with everyone, and the data between the corporate intranets (several PCs) is securely interconnected through the IPSec VPN tunnel established by these gateways.

Application Scenario

Solution

(1) on the HQ side:

a Log in to Reyee EG by the default IP 192.168.110.1.

b Click Setup > VPN > IPSec > Add the policy.

c Configure the IPsec VPN Security Policy.

(2) on the Branch side:

a Log in to the Reyee EG by the default IP 192.168.110.1.

b Click Setup > VPN > IPSec and then Add the policy.

c Configure the IPSec Security Policy, make sure the IKE Policy and Connection Policy are same on both side.

d Check IPSec Connection Status.

Note

● If you HQ EG has no public IP configured under other external devices, you need to configure port mapping on external devices and configure Local ID Type as NAME on HQ and Branches.

Author: wittawat@ruijie Time: 2022-7-26 21:16
Could you please increase some quality of demonstrate pictures? because it's not cleary and blur

Author: GTAC-Sophia Time: 2022-7-27 09:52

WittawatVonghangool replied at 2022-7-26 21:16
Could you please increase some quality of demonstrate pictures? because it's not cleary and blur

Sorry for the inconvenience to your reading. You also can check the full content of this post in the 118 page of Reyee Series Implementation Cookbook V1.0 - Wireless - ruijienetworks. The picture in the Cookbook is more clearly.

Author: dwahome@gmail.c Time: 2024-1-26 16:22
I have a few questions about the capabilities of the firewall..
1. How do you switch from Main Mode, to Aggressive or most importantly IKEv2
2. What DH Groups do you support, DH 2. 5, 14
3. On Phase 1 and 2 AES 128&256 do you support CBC and/or GCM.

I ask because we cant get the firewall to work across a Mikrotik on AWS yet other Vendors can connect.

Author: taizhaolong@rui Time: 2024-1-26 19:53

Denis Wahome replied at 2024-1-26 16:22
I have a few questions about the capabilities of the firewall..
1. How do you switch from Main Mode, ...

Dear Denis,

Please feel free to connect with us through our Real-time Interactive Technical Assistance (RITA) platform for a prompt resolution:

[RITA Link:

www.ruijienetworks.com/rita

Welcome to Ruijie Community (https://community.ruijienetworks.com/)