Title: How to know the location of AP? [Print this page] Author: GTAC-Wayne Time: 2022-2-21 21:31 Title: How to know the location of AP? You can tyoe these commands on AC to change the color of led indicator on AP:
ws6108#conf t
ws6108(config)#ap-config AP1 //AP1 is the name
ws6108(config-ap)#led on //turn on the led
ws6108(config-ap)#no led on //turn off the led
Before typing 'led on', the led of AP was normal blue.
After typed 'led on', the led of AP was changed to red.
After typed 'no led on', the led of AP will be changed to the normal blue again.
Notice:These commands are only suitabled on AC.
Welcome to Ruijie Community (https://community.ruijienetworks.com/)
