Ruijie Community

Title: How to configure NTP on ruijie device? [Print this page]

Author: chenzixuan1@rui Time: 2022-3-2 15:00
Title: How to configure NTP on ruijie device?

Pleae perform the following steps:

a) Basic network routes setting

Ensure that NTP client can communicate with the NTP server

b) (Optional) Configuring a switch as NTP Server

Note：

Mostly NTP server is a particular server rather than a switch in production network. This example shows how to configure a switch as a NTP server:

Ruijie(config)#ntp master

c) Configuring a switch as NTP client

Ruijie(config)#ntp server 192.168.2.1 ------>set NTP server IP address

Ruijie(config)#ntp update-calendar ------>allow system to save clock in hardware even power interruption

d) (Optional) Specifying a interface on switch to communicate with NTP Server

Ruijie(config)#ntp server 192.168.1.2 source loopback 0 ------> specify interface loopback 0 to communicate with NTP Server

Welcome to Ruijie Community (https://community.ruijienetworks.com/)