Ruijie Community

Title: how to config combo port on switch S5750? [Print this page]

Author: GTAC-Wayne Time: 2022-3-7 21:01
Title: how to config combo port on switch S5750?

Here is the SFP combo port configuration on the ruijie switch:

switching electrical port 23 on the switch to an SFP port

Ruijie>enable
Ruijie#configure terminal
Ruijie(config)#interface gigabitEthernet 0/23
Ruijie(config-if-GigabitEthernet 0/23)#medium-type fiber //Switching the electrical port to an SFP port
Ruijie(config-if-GigabitEthernet 0/23)#medium-type copper //Switching the SFP port to an electrical port

Welcome to Ruijie Community (https://community.ruijienetworks.com/)