Ruijie Community

Title: OpenVPN configuration guide on Reyee EG [Print this page]

Author: duc@ruijienetwo Time: 2022-3-11 00:43
Title: OpenVPN configuration guide on Reyee EG
Reyee EG model support OpenVPN: EG105G V2, EG210 series with latest firmware version.
Below steps will show you how to configuration OpenVPN on Reyee EG.
1. Steps 1: Login in to EG => VPN menu => OpenVPN.

2. Steps 2: Enable OpenVPN and select/ input VPN information to below fields.
+ VPN type (Server/Client) based on your needed
+ Server Mode - 3 authentications method supported: Account, Certificate, Account & Certificate
- Account mode: you have to create account at VPN => VPN Clients
- Certificate: VPN connection will use certificate to auth.
- Account & Certificate: use both methods
+ Protocol: TCP or UDP
+ Server Address: IP/domain (your WAN ip address) or your domain name.
+ Port ID: 1194 by default.
+ IP Range: the IP will assign to client device.
+ Deliver Route: based on your network, you can add more than one route.
Advanced configuration:
- TLS authentication: to secure your VPN connection with TLS key
- Allow Data Compression: Yes by default.
- Route All Traffic over VPN: No by default.
- Ciper: Allow you to chose data encryption algorithms, by default will be AES-128-CBC
- Deliver DNS: will assign DNS address to client device.
- Auth: SHA1 by default.

3. Steps 3: Save configuration by click to Save button and Export Client Config/ Server log

4. Steps 4: Download and install OpenVPN application to your PC
- You can download OpenVPN client in this link (select suitable version for your PC): https://openvpn.net/community-downloads/

5. Steps 5: Import Client config to OpenVPN client after installed on your PC.
- Extract Client that you downloaded before then you will get etc folder with client.ovpn file
- Right click to OpenVPN icon on try system and chose Import => Import file... => browse to the location client.ovpn extracted.

File Imprted successfully then you can connect to VPN

6. Final steps: Right clict to OpenVPN icon on try system then select connect, if you using Account authentication method then you have to input your vpn account at this step.

Connection success and able to access to HQ resource.

Author: GTAC-Daisy Time: 2022-3-16 20:19
wonderful sharing

Author: GTAC-Wayne Time: 2022-3-16 20:29

Daisy replied at 2022-3-16 20:19
wonderful sharing

Good post !!

Author: deanr@capcommun Time: 2022-4-25 18:22
I have a EG105G-P with ReyeeOS 1.56.1325 Firmware but do not have the option for OpenVPN in my menu

Author: mddmmddm Time: 2022-9-24 10:13
Hello! Is there a way to create a site-to-site OpenVPN tunnel? EG OpenVPN server routers are missing the capability of creating static routes back to EG OpenVPN client routers. Can this be a feature request, to be able to create static routes using as exit interface tun0 interface?

Author: rvieira@visiote Time: 2024-2-21 18:38
I have a question, is it possible to set a static IP for OpenVPN? Thanks.

Author: chenchunyan@rui Time: 2024-2-21 19:49

Renato Vieira replied at 2024-2-21 18:38
I have a question, is it possible to set a static IP for OpenVPN? Thanks.

Dear sir/madam,
No, cannot support. After you connect to Open VPN, you will get an ip address automatically

Author: TryXZ Time: 2024-3-30 18:23
Sir, I have connected with openvpn but I can only reach the gatewayny ip 192.168.10.1 and can't reach our system ip at 192.168.10.2, how can I connect to our system ip?

Author: chenchunyan@rui Time: 2024-3-30 18:39

TryXZ replied at 2024-3-30 18:23
Sir, I have connected with openvpn but I can only reach the gatewayny ip 192.168.10.1 and can't reac ...

Hi sir/madam,
could you show me the VPN tunnel status and the route settings please?

Author: yujiamin@ruijie Time: 2024-4-1 09:30

TryXZ replied at 2024-4-1 08:19
Thank you for answering, this is the PC to client settings that I made. So from OpenVPN I want to ...

Dear sir

In the IP Range section is to set the tunnel IP which will assign to the VPN clients.

You need to add the server intranet network routes in th Deliver Route section and the tunnel IP range can not be the same with it, otherwise will cause conflict.

Best regards
Jenny

Author: ptindotekhnoplu Time: 2024-4-1 13:29

GTAC-Jenny replied at 2024-4-1 09:30
Dear sir

In the IP Range section is to set the tunnel IP which will assign to the VPN clients.

Thank you for responding. I've tried other IPs but still can't access the LAN other than gateway 10.252.0.1. Can you suggest what I should do?

Author: guominxiang@rui Time: 2024-4-1 15:22

TryXZ replied at 2024-4-1 13:29
Thank you for responding. I've tried other IPs but still can't access the LAN other than gateway 1 ...

Can I know the ip address range of your local LAN port?

Author: acacio.rapaz@fa Time: 2024-5-26 18:11

GTAC-Micca replied at 2024-4-1 15:22
Can I know the ip address range of your local LAN port?

Good day, i cannot download the configurations.
Router EG105G-V2

Download File don't apear. THANKS

Author: zanzaran@gmail. Time: 2024-8-14 04:55

Acácio José Gaspar Rapaz replied at 2024-5-26 18:11
Good day, i cannot download the configurations.
Router EG105G-V2

I have the same problem. Cannot download VPN file

Welcome to Ruijie Community (https://community.ruijienetworks.com/)