No. | Module | Description | Details |
1 | Configuration | In bridge mode, VLAN 233 is not available. | In bridge mode, the VLAN ID of SSID could not be ‘VLAN233’ if there is an SSID working in NAT mode on the same AP. Reason: VLAN233 will be used as the internal VLAN if one or more SSID work in NAT mode. |
2 | AP | In the management mode, AP with multiple uplink LAN ports only takes the port LAN 1 as uplink port. | For devices with dual power supply ports, like AP740-I, AP840-I, only going online through LAN1 is supported by MACC. |
3 | History Record | It will take a while for searching the history. | When the data of historical users, connection logs and etc. reach to a million count, the corresponding search operation will take a long time (around 10 seconds).Both big data and server performance cause the problem. |
4 | Maintenance | Client log export failure. | Client data export will fail if the number of records is more than 100,000. |
5 | PPSK | PPSK can be configured in the root network only. | Only the Sub account user who is assigned with the root network is able to configure PPSK. |
6 | Captive portal | Captive portal seamless is globally configured on APs. | If one portal's SSID enables seamless, all portals' SSIDs will be enabled at the same time, vice-versa for the disable function. |
7 | Configuration | The NAT address pool mode is changed. An address pool is required. | When you create or edit an SSID and set Forward Mode to NAT, the NAT address pool is changed. An address pool is required. |
8 | Sub account | It is recommended to select a layer-1 network to create a sub account. | Only the sub account of layer-1 network can view statistics in Analysis. |
9 | Facebook Like | An error occurs if the iPhone user taps Like during authentication. | If the user authenticates to SSID through the popup page which contains Facebook Like function, when he taps the Like button, an error will occur. In order to normally use Facebook Like function, it is recommended to access the Internet through a browser after connecting to SSID, and then open the portal page. |
10 | Change the time zone of network | After the time zone is changed, the data of existing reports are not consistent with the new time zone. | After the time zone is changed, the data of existing reports will not be recounted, so the statistics are not consistent with the new time zone. The data of newly-generated reports are correct. |
11 | Voucher | Voucher limitation of each network. | Up to 20,000 vouchers can be added to each network (including sub network), and up to 1,000 vouchers can be exported. |
12 | Tunnel | Tunnel limitation on EG | In the same tenant, up to 10 tunnels can be created. On the same device, up to 5 tunnels can be created. The expiry time for the tunnel is 3 hours. |
13 | Client | Limitation on historical clients displaying. | Up to 1000 historical clients are displayed. |
14 | AC Management | VAC limitation | Not support the VAC scenario |
15 | AC Management | AC RRM limitation | Only when the country code is CN(China) or US(United States), RRM is supported. |
16 | AC Management | AC configuration limitation | Only APs in the default group of AC can be configured on Cloud. |
17 | Reyee AP | Not support PPSK, Portal auth and RRM | PPSK, Portal Auth and Cloud RRM are not supported on Reyee APs. |
18 | Portal SMS | SMS login | Not support phone number reporting and online policy control. |
19 | Hand over Project | Hand over a project to another account | The project to be handed over should have less than 100 sub projects. |
| 20 | Reyee AP | Network Group Level | Recomend not to add subgroup for Reyee APs, if required, only one level of subgroup can be used. |
| Welcome to Ruijie Community (https://community.ruijienetworks.com/) | Powered by Discuz! X3.2 |