Ruijie Community

Title: Case Sharing --- 4. Device setup [Print this page]

Author: admin Time: 2022-3-23 15:42
Title: Case Sharing --- 4. Device setup

4.1 Project Setup

Step1: Add a Project named Building1

Step2: Add a 8 Sub-Project under the Building1

Step3: Add a EG to Building1

Step4: Before the EG can access to internet, the EG will be shown on unauthorized gateway list

Step5: Click the Sub-project(Floor) and add the APs with the template file

Step6: Before the APs can access to internet, the status are Not Online Yet

Step7: Click the Sub-project(Floor) and add the access switch

Step8: Before the switch can access to internet, the status are Not Online Yet

4.2 EG setup

Step1: Access to EG’s eWeb

Step2: Click the WAN and configure the WAN to connect to the uplink ISP

Step3: After the WAN obtain the IP address, try to test the internet connection

Step4: AEnable the Central management

Step5: Input the URL for EG to connect to Ruijie Cloud

Step6: Wait the EG online on Ruijie Cloud

Step7: Configure the LAN interface of EG gateway

Step8: Configure the LAN interface DHCP pool of EG gateway

4.3 Switch setup

Step1: Connect the switch to the EG gateway LAN

Step2: After the switch obtain the IP address, try to test the internet connection

Step3: Configure the CWMP URL to connect to Ruijie Cloud

Swithch#config
Switch(config)#cwmp
Switch(config-cwmp)# acs url http://devicereg.ruijienetworks.com/service/tr069servlet

Step4: Wait the switches online on Ruijie Cloud

4.4 AP setup

Step1: Connect the APs to the access switch

Step2: The APs will online on the Ruijie Cloud automatically

Welcome to Ruijie Community (https://community.ruijienetworks.com/)