Title: How to create the IPSEC tunnel between two EG105s behind the Router？ [Print this page] Author: huanglinjian@ru Time: 2022-3-31 19:25 Title: How to create the IPSEC tunnel between two EG105s behind the Router？
1. Enable the port mapping from router to EG105G.
Port: UDP 4500 and 500.
2. Change the mode to "NAME" and configure the local ID and peer ID.
Make sure the local ID is same with peer.
Welcome to Ruijie Community (https://community.ruijienetworks.com/)
