Title: How can I configure to make AP get the same network segment IP with the EG? [Print this page] Author: admin Time: 2022-4-1 16:48 Title: How can I configure to make AP get the same network segment IP with the EG? Network Topology
Configuration Steps
Step 1: Configure the corresponding gateway ip address on the EG LAN interface
Choose Network > Interface > Basic Setting > LAN Config, for example, if the IP address of VLAN 1 is 192.168.1.x, configure the gateway address as 192.168.1.1.
Step 2: Enable DHCP function and configure DHCP server configuration on the EG
Choose Network > DHCP > DHCP button > Add DHCP, the the address pool range is in the same address segment as gateway address.
Step 3: Configure the native vlan of the switch port connected to the AP to the corresponding vlan, the switch port native vlan 1 by default, then the AP will get the corresponding vlan ip you configured.
Welcome to Ruijie Community (https://community.ruijienetworks.com/)
