Title: How to configure the connect time of wireless users? [Print this page] Author: zhangwei13 Time: 2022-4-14 18:54 Title: How to configure the connect time of wireless users? a) For Reyee AP, you can set schedule broadcast SSID. So users can not connect to the ssid when the broadcast time has been ended.
Click How to set schedule broadcast SSID on Reyee AP? to see the configure steps.
b) For Ruijie AP, you can refer to these commands to configure schedule broadcast ssid.
AP630(IODA)(config)#schedule session 1 time-range 1 period Mon to Sun time 12:00 to 23:59
AP630(IODA)(config)#schedule session 1 time-range 2 period Mon to Sun time 0:00 to 8:59
AP630(IODA)(config)#schedule session 1 wlan 1AP630(IODA)(config)#schedule session 1 Noteļ¼
time-range: The time period during which the SSID is not broadcast.
For Ruijie AP, you can also configure Cloud authentication with one-click Login by customize the access duration, shown in the below picture. Note:
After enable cloud authentication on ruijie AP, all users who connect to the SSID with captive portal enabled are need the authentication.
Welcome to Ruijie Community (https://community.ruijienetworks.com/)
