Ruijie Community

Title: Card (Supervisor Module) Insertion Operation [Print this page]

Author: admin Time: 2017-5-3 15:05
Title: Card (Supervisor Module) Insertion Operation

Card (Supervisor Module) Insertion Operation (Wear ESD Gloves or an ESD Wrist Strap in Daily Operations).

Author: admin Time: 2017-5-3 15:05
Step 1: Confirm the models and slots of cards and supervisor modules, as well as positions of guide rails.

Step 2: Turn the self-locking lever to a position vertical to the panel of a card (supervisor module).

Step 3: Hold the card (supervisor module) with hands, keep it parallel to the chassis, and insert it into the correct slot till it is locked by the self-locking lever.

Step 4: Hold the self-locking lever, insert the card (supervisor module) along the motion trail of the self-locking lever till the card (supervisor module) is completely inserted into the chassis.

Step 5: Use a screwdriver to tighten screws on the left and right sides of the card (supervisor module).

Welcome to Ruijie Community (https://community.ruijienetworks.com/)