Title: How to configure wired repeater? [Print this page] Author: admin Time: 2022-4-25 17:46 Title: How to configure wired repeater? Step 1: Connect your PC to the EW1200G Pro LAN port, and then login it with the default LAN IP 192.168.110.1
Step 2: Click More -> Repeater/WISP, choose Access Point mode, and then click Check.
Step3: Configure the Local Router Wi-Fi and Save.
Finish
Author: Jeandrebez@gmai Time: 2022-7-21 22:14
ive tried doing this remotely via wan port but when i press the check button it disconnects for a sec and wont save the setting . is there a way to do it via the cloud software and in batch ?
which model were you tried to mesh?
Usually i just connect to the default SSID, and use that to go search for the SSID that it wish to mesh first.
B4 or after that, scan the QR code into the project of your cloud account, it should work seamlessly after that.
Bear in mind that mesh Wi-Fi under EW series can't support multiple VLAN but wired repeater can.
Welcome to Ruijie Community (https://community.ruijienetworks.com/)