Title: How to configure AP and wireless users on different network segments？ [Print this page] Author: admin Time: 2022-5-5 15:17 Title: How to configure AP and wireless users on different network segments？ Requirement
● EG works as a DHCP server to assign IP addresses to wireless users and AP & switch devices
● The AP & switch devices obtain the IP address 192.168.110.0/24 in default VLAN network segment for Internet access
● The wireless users obtain the IP address 192.168.6.0/24 in the VLAN6 network segment for Internet access Network Topology
Configuration Steps
Step 1: Click Router
-> Basics-> LAN-> LAN Settings-> Add, Configure LAN Settings and DHCP pool of VLAN1 and VLAN6 network segment on the EG.
Step 2: Click Switches-> Manage-> Basic Settings-> VLAN Member to create VLAN6 on the switch, and clickVLAN Settings to set port2 and port9 which connect to AP and EG to trunk port and allow the VLAN1 and VLAN6 to pass through, then check the port settings on the device.
Step 3: Click Wireless-> Wi-Fi-> Wi-Fi Settings, Configure SSID named Reyee_test and set VLAN6 to this ssid.
Welcome to Ruijie Community (https://community.ruijienetworks.com/)
