Ruijie Community
Title:
Why 802.1x authentication failed with Ruijie Switch failed？
[Print this page]
Author:
admin
Time:
2022-5-20 16:00
Title:
Why 802.1x authentication failed with Ruijie Switch failed？
Problem Description
：
Authentication process do
esn't start on the suppliant side after plug
ging
it under the dot1x port of switch.
Topology
Solution
Checking the configuration of the switch by referring to the following guide.
How to configure 802.1x authentication on Ruijie Switch - Switch - ruijienetworks
2
.
Capture packet on supplicant side, if it can receive the packet from switch but no send any eap response packet.
Please modify the setting of supplicant side refer to the following guide:
https://www.binghamton.edu/its/about/organization/operations-and-infrastructure/networking/windows-manual-config.html
Welcome to Ruijie Community (https://community.ruijienetworks.com/)
Powered by Discuz! X3.2
