Ruijie Community

Title: How to configure L2TP over IPsec VPN on Ruijie EG for clients to side scenario? [Print this page]

Author: admin    Time: 2022-5-20 16:30
Title: How to configure L2TP over IPsec VPN on Ruijie EG for clients to side scenario?
Scenario & Topology


Configuration Points:
Configuration Steps:

2. Choose Headquarter mode, then click Next
3.Choose Branch Type to be Mobile User, then click Next.

4. Choose VPN type to be L2TP IPSec.

5. Configure Basic Info like following

6. Add  Account, then click Next.

7. Configure Pre-shared Key then click Next.

8. Click View to check the setting needed on PC side.

9 On the Clients side (take Windows 10 as example):
a      Enter Control Panel→Network and Internet→Network and Sharing Center



b      Configure VPN connection




   
c      Change adapter’s setting.



d    Click Advanced Settings to configure the pre-shared password.


e    Using the account of PC-to-Router to connect VPN.


10.Phone Settng

11.Verification on EG


Author: The Wi-Fi Hero    Time: 2022-7-30 15:14
Yes! this is great!

Author: hongquangcit@gm    Time: 2022-11-8 09:31
I tried following your instructions, connected to the intranet via VPN, pinged to the internal devices but the problem arises that I can't connect to the shared folder resource shared within the network and cannot connect to the company's internal software. Can you help me explain this problem? thank!

Author: GTAC-Micca    Time: 2022-11-9 10:29
Quang Pham replied at 2022-11-8 09:31
I tried following your instructions, connected to the intranet via VPN, pinged to the internal devic ...
May I know your model pls?
Please check these first:
1. Whether the IKE policies (encryption and authentication) are same.
2. Whether the pre-shared keys are same.
3. Whether the peer IP addresses is right.
4. Whether the negotiation modes are same.





Welcome to Ruijie Community (https://community.ruijienetworks.com/) Powered by Discuz! X3.2