Ruijie Community

Title: How to reset the enable password of AP740-I ? [Print this page]

Author: Levy Time: 2017-10-10 12:02
Title: How to reset the enable password of AP740-I ?
How to reset the enable password of AP740-I ?

Author: admin Time: 2017-10-16 09:48

Note: This password recovery only for 11.X fatAP mode.

Step 1-By input command ‘ctrl+c’ continuouslyto enter uboot, and then use command ‘ctrl+q’ to enter CLI.

Step 2-Input command ‘ubootui’ and click ‘enter’.

Step 3-Implement command ‘ctrl+p’ immediately.

Step 4-Implement ‘setenvrunlevel 1’ and ‘run linux’. (System will restart in this time.)

Step 5-Use command ‘vi /data/config.text’ torevise configuration file.

Input：/password (Enter)

Press ‘D’ for 2 times.

Step 6-By command ‘:wq!’ save and exit. Input ‘init 3’ continuouslyfor 2 times, system will restart.

Step 7-After restarting, reload device. Enterubootui again according to step 1-2-3. (This step is necessary, or it will leadto when AP restarts every time, it will enter linux interface. If you haveentered linux interface, you can enter main interface by inputting ‘init 3’ continuouslyfor 2 times.)

Step 8-Input ‘setenvrunlevel 3’ and ‘saveenv’. Run ‘run linux’.

Welcome to Ruijie Community (https://community.ruijienetworks.com/)