Ruijie Community

Title: How to config flow control for users on Ruijie EG? [Print this page]

Author: GTAC-Eureka    Time: 2022-6-2 21:33
Title: How to config flow control for users on Ruijie EG?
a) Create users

Configuration path:  User > User > Common User
1. Click root > Add Group  to add a user group.




Create a user group called "speedlimit".




2. Click speedlimit > Add User(IP Range)  to add user‘sIP range.








Notice:

Single lP address example:192.168.1.2 and2000:1.
IP range example: 192.168.2.2-192.168.2.10 and2000::2-2000:10.
lf you enter the lPv4 address (range) and lPv6address (range), please use | to separate them.
Example: 192.168.1.2|2000::1 and192.168.2.2-192.168.2.10|2000::2-2000:10.


b) Configure Flow Control

Configuration path:  Flow > Smart Flow Contorl > FlowControl
1. Enable Flow Control




Select Template, Interface and fill thebandwidth of the Interface.




2. Enter Change Policy page,click Add Policy to set speed limit policy for specific users
2.1 Select Interface, fill the Policy Name:




2.2 Configure Bandwidth:
Add Sub Channel and set speed limit




Select the Sub Channel




Notice:

If EG prompts this error when you set the speedlimit, then please first change the speed limit in Parent Channel




2.3 Select users:




2.4 Select APP




2.5 Set Policy Active Time:






Test result:







Welcome to Ruijie Community (https://community.ruijienetworks.com/) Powered by Discuz! X3.2