Ruijie Community

Title: RG-AP180 Etherport 2-5 are not working [Print this page]

Author: meno.abels@advi Time: 2022-6-17 18:01
Title: RG-AP180 Etherport 2-5 are not working
Hi,
I have two RG-AP180 these devices have 1 Backsite and 4 visible port. After I updated to the latest version the 4 visible port are not working as expected.
They seams not to be bridged to the backsite port --- i had a look to the cli and everything looks fine:
!
interface GigabitEthernet 0/1
encapsulation dot1Q 1
!
interface GigabitEthernet 0/2
encapsulation dot1Q 1
rldp port loop-detect shutdown-port
!
interface GigabitEthernet 0/3
encapsulation dot1Q 1
rldp port loop-detect shutdown-port
!
interface GigabitEthernet 0/4
encapsulation dot1Q 1
rldp port loop-detect shutdown-port
!
interface GigabitEthernet 0/5
encapsulation dot1Q 1
rldp port loop-detect shutdown-port
!
Is there something known how to enable the visible ports again?
thx
meno

Author: GTAC-Patrick Time: 2022-8-12 11:59
Dear sir,
May I know what interface your PC is connecting?
Or would you provide the whole configuration of this AP for us ?

Best regards,
Patrick

Author: dan@green-homen Time: 2024-5-30 00:02
hi
did you manage to solve this?
how please?
thanks

Author: chenchunyan@rui Time: 2024-5-30 00:20

Dan Green replied at 2024-5-30 00:02
hi
did you manage to solve this?
how please?

Hi Dan Green,
May I know if you have encountered same issue on the ruijie AP too? If yes, please feel free to talk with me again. I would be glad to help you in Community.

Author: dan@green-homen Time: 2024-6-4 02:35

GTAC-Vivian replied at 2024-5-30 00:20
Hi Dan Green,
May I know if you have encountered same issue on the ruijie AP too? If yes, please f ...

Yes I still have this problem - Ethernet lines disconnect.
I'd be happy to solve it

Welcome to Ruijie Community (https://community.ruijienetworks.com/)