Ruijie Community
Title: TFTP cannot success. [Print this page]
Author: 834228140 Time: 2017-11-1 17:13
Title: TFTP cannot success.
TFTPcannot success. Prompt as follows:
Copyfailed. Invalid argument’
Author: admin Time: 2017-11-1 17:18
Check whether you have input the command like ‘S2910C-01(config)# tftp-client source gigabitEthernet 0/6’. It means TFTP can be used only in Gi0/6, if Gi0/6 port isn’t be connected, it will lead to TFTP failure. You should delete the above command to solve this problem.
| Welcome to Ruijie Community (https://community.ruijienetworks.com/) |
Powered by Discuz! X3.2 |