Title: How to add VLAN in the Lan port on Reyee AP? [Print this page] Author: panjingyi1@ruij Time: 2022-7-5 11:33 Title: How to add VLAN in the Lan port on Reyee AP? Click Basis > LAN > LAN Settings, and enable the Port VLAN function
Click Add to add a new VLAN
Click Port VLAN to configure the port settings based on the VLAN
UNTAG: If the VLAN 10 is set as the untag VLAN of port 2, VLAN 10 will be the native VLAN of port 2. The packets from VLAN 10 will be forwarded over port 2 without tag VLAN 10 and all untagged packets over port 2 will be taken as the packets from VLAN 10.
● Each port can be configured with only one untag VLAN.
● The native VLAN of port 1 is the default VLAN and cannot be edited. TAG: If both VLAN 10 and VLAN 20 are set as tag VLAN of port 2, the packets from VLAN 10 and VLAN 20 will be forwarded over port 2 with the corresponding VLAN tag. Not Join: If both VLAN 10 and VLAN 20 are set as Not Join port 2, port 2 will not receive or transmit packets from VLAN 10 or VLAN 20.
Welcome to Ruijie Community (https://community.ruijienetworks.com/)
