Ruijie Community

Title: Static Route Using Exit Interface OpenVPN Tun0 [Print this page]

Author: mddmmddm Time: 2022-9-24 10:15
Title: Static Route Using Exit Interface OpenVPN Tun0
Hello! Is there a way to create a site-to-site OpenVPN tunnel? EG OpenVPN server routers are missing the capability of creating static routes back to EG OpenVPN client routers. Can this be a feature request, to be able to create static routes using as exit interface tun0 interface?

Author: GTAC-Patrick Time: 2022-9-27 17:13
May I know the topology of your network?
are there 2 EG210G-P on both side?

Author: sunjiantao@ruij Time: 2022-11-15 17:58
Hello Marcos, I got your requirements, let me discuss them with our RnD team and ask them to support, thanks for your suggestion.

Author: it@conductorjas Time: 2025-2-27 17:46
Any updates on this issue?

Author: yujiamin@ruijie Time: 2025-2-28 22:10

Sogi White replied at 2025-2-27 17:46
Any updates on this issue?

Dear,

EG210G-P in the latest firmware version already support open vpn. You can refer to the following link:

https://reyee.ruijie.com/en-global/products/reyee-router/eg-series/rg-eg210g-p

Author: it@conductorjas Time: 2025-3-3 18:00

GTAC-Jenny replied at 2025-2-28 22:10
Dear,

EG210G-P in the latest firmware version already support open vpn. You can refer to the foll ...

Hi Jenny,
I mean the config for site to site using openvpn.

Author: v-shaojinren@ru Time: 2025-3-3 18:41

Sogi White replied at 2025-3-3 18:00
Hi Jenny,
I mean the config for site to site using openvpn.

Dear customer,
Open VPN can only allow client devices to access the network of the VPN server. It cannot allow the other way around. For site to site VPN, you mean consider using IPsec VPN. Here is a guide on how you can configure it.
https://community.ruijienetworks.com/forum.php?mod=viewthread&tid=4346&extra=page%3D1

Welcome to Ruijie Community (https://community.ruijienetworks.com/)