Ruijie Community
Title: How to reset the password of AC/AP [Print this page]
Author: admin Time: 2018-1-26 11:53
Title: How to reset the password of AC/AP
How to reset the password of AC/AP
I. Network Topology
II. Configuration Steps (configuration file remains)
1. Power off the device, then power up.
2. Press CTRL +C, enter CTRL mode.
3. Input CTRL+Q,enter uboot mode. And then input "main_config_password_clear"
4. Device will be reloaded automatically.
5.When finish reloading, enter CLI without input password.
Note: The default timeout period is10min. Please change your password before time out.
6.Change password, and then use the command“wr” to save your configuration.
7.save configuration
Re-login the device, and execute the command "show runing-config" to check configurations.
Author: lindadieggoo@pr Time: 2022-5-6 18:16
I appreciate the essential lesson you conveyed in your piece.
Author: jackj71@icloud. Time: 2022-9-5 17:33
It’s a point to point wireless bridge est310 how do I plug that into a laptop?
Author: jackj71@icloud. Time: 2022-9-5 17:35
How do I take down the helpful 1 ?
Author: jackj71@icloud. Time: 2022-9-5 17:35
How do I take down the helpful 1 ?
Author: zhangwei13 Time: 2022-9-7 22:20
thanks for your kindness 
Welcome to contact us again if you have any questions or suggestions
Author: zhangwei13 Time: 2022-9-7 22:24
Hi sir
you may connect the EST to the PoE port of power adapter, then connect the LAN port of power adapter to laptop.
Author: pinterestgem@gm Time: 2022-10-17 18:36
GTAC-Wayne replied at 2022-9-7 22:24
Hi sir
Thank you sir
| Welcome to Ruijie Community (https://community.ruijienetworks.com/) |
Powered by Discuz! X3.2 |
