Ruijie Community

Title: Captive portal is not showing when user tries to connect my SSID [Print this page]

Author: info@aadimcolle Time: 2023-1-3 21:50
Title: Captive portal is not showing when user tries to connect my SSID
My device is following:

EG105G-P-V2

Here is how I tried to enable captive portal to my SSID.

Created a SSID by assigning VLAN port 10
I created a Captive Portal by going Authentication -> Captive Portal -> Add and Save
On the page https://cloud-as.ruijienetworks.com/admin3, Monitoring -> Device -> Gateway -> Opened SN
Config -> Cloud Portal Auth
Enabled Auth and Clocked Add
Network = VLAN10 and selected my Captive Portal then Clicked Save and Again Save
Back to Configuration -> Authentication -> Captive Portal
Click on Synchronize
- My Captive portal is not synchronized. Hence, I clicked on my captive portal clock icon and clicked Ok for Sync the portal to EG.
</li>

I did all the above steps but captive portal is not synchronized and not working.
Did I miss anything?

Author: GTAC-Steve Time: 2023-1-4 10:27
Dear sir,

You can check your configuration by this link:https://community.ruijienetworks.com/forum.php?mod=viewthread&tid=1759

Best regards,

Steve

Welcome to Ruijie Community (https://community.ruijienetworks.com/)