Ruijie Community

Title: How to config Weight parameters for 3 Lines WAN on EG210G-E [Print this page]

Author: yujiamin@ruijie Time: 2023-1-12 19:56
Dear sir

The traffic will be spread across multiple links according to the weight of each WAN port. For example, if WAN and WAN1 weight are set to 3 and 2 respectively, 60% of the total traffic will be routed over WAN and 40% over WAN1. If you want ISP1 to utilize 50% of its bandwidth and the ISP2 and ISP3 is 25% + 25% respectively. You can set the weight as 2,1,1 as your picture showed.

Best regards
Jenny

Author: yunayvaine@gmai Time: 2023-1-13 16:30
Edited by justAhnDz at 2023-1-13 16:33

GTAC-Jenny replied at 2023-1-12 19:56
Dear sir

The traffic will be spread across multiple links according to the weight of each WAN port. ...

Thank you GTAC-Jenny for the fast response with regards to my concern.
Can I ask another question.
Can I combine my 3 ISP bandwidth as one using EG210G-E?

If can, can you show me how to do it.

Author: yujiamin@ruijie Time: 2023-1-16 12:30

justAhnDz replied at 2023-1-13 16:30
GTAC-Jenny replied at 2023-1-12 19:56
Dear sir

Dear sir

Sorry sir that Reyee EG cannot support link aggregation, but it can support bandwidth aggregation you can refer to this guide:
https://community.ruijienetworks.com/forum.php?mod=viewthread&tid=3465

Best regards
Jenny

Welcome to Ruijie Community (https://community.ruijienetworks.com/)