Ruijie Community

Title: How to allow VLAN to pass through the LAN port of EG210G-P? [Print this page]

Author: GTAC-Sophia Time: 2023-1-18 16:13
Title: How to allow VLAN to pass through the LAN port of EG210G-P?
If you want to allow other VLANs to pass through the LAN port, you need to create a sub-interface under the LAN interface, Here we take VLAN10 as an example:
Web:
1.Select LAN port and then click "Sub interface."

1. Configure VLAN10 and IP addresses

CLI:

EG2100-P(config)#interface gigabitEthernet 0/2.1
EG2100-P(config-subif-GigabitEthernet0/2.1)#encapsulation dot1Q 10
EG2100-P(config-subif-GigabitEthernet 0/2.1)#ipaddress 192.168.10.1 255.255.255.0

Welcome to Ruijie Community (https://community.ruijienetworks.com/)