Ruijie Community

Title: RG-EG-2100-P v2 : How do we do client isolation at a VLAN ? [Print this page]

Author: tengsern.tan@uc Time: 2023-2-27 23:57
Title: RG-EG-2100-P v2 : How do we do client isolation at a VLAN ?
I created a VLAN that's meant for Guess access and this can be extended to dumb switch or 3rd party AP etc.
I do not know any of the client under this VLAN to see each other, as to isolate them from access each other, both wired and Wirelessly connected.
I was told I have to create ACL rule for each and every IP of this VLAN. Is that the only way to do so?
How shall I start doing it? Is there a script that can be shared?

Author: chenzixuan3@rui Time: 2023-2-28 10:30
Dear sir

Sorry for the inconvenience , EG is not support isolation base on vlan , you need configure it on AP
Ruijie AP:

Ruijie(config)#wids

Ruijie(config-wids)#user-isolation ssid-ap enable

Ruijie(config-wids)#exit

Reyee AP :

Author: tengsern.tan@uc Time: 2023-3-1 01:08

GTAC-Joy replied at 2023-2-28 10:30
Dear sir

Sorry for the inconvenience , EG is not support isolation base on vlan , you need configu ...

just found an old discussion on EG2100P V2 regarding user isolation on VLAN via ACL settings.
https://community.ruijienetworks.com/forum.php?mod=viewthread&tid=4003

Is it still working or like what you said , Ruijie Gateway is no longer supporting VLAN user isolation anymore?

Author: chenzixuan3@rui Time: 2023-3-1 10:54

The Wi-Fi Hero replied at 2023-3-1 01:08
just found an old discussion on EG2100P V2 regarding user isolation on VLAN via ACL settings.
htt ...

Dear sir

This old discussion is used to configure to prohibit users between different VLANs from accessing each other

Author: tengsern.tan@uc Time: 2023-3-2 00:18

GTAC-Joy replied at 2023-3-1 10:54
Dear sir

This old discussion is used to configure to prohibit users between different VLANs from ...

So we have to create ACL rule for each and every IP address in a VLAN to establish the client isolation right?

Author: chenzixuan3@rui Time: 2023-3-2 13:16

The Wi-Fi Hero replied at 2023-3-2 00:18
So we have to create ACL rule for each and every IP address in a VLAN to establish the client isol ...

Dear sir

Sorry , ACL cannot block access to users on the same network segment ，You need to enable the isolation function on the AP to prevent mutual visits between users on the same network segment

Welcome to Ruijie Community (https://community.ruijienetworks.com/)