Ruijie Community

Title: Can I set priority AP for device? [Print this page]

Author: sonkub00@gmail. Time: 2023-3-1 00:14
Title: Can I set priority AP for device?
I have two AP, that separate one floor per one AP with same SSID profile.
I have serveral wireless device. There are distributed on both floors.
I monitor client list that connect to AP. I found some device from 1st floor connected to AP 2nd floor.
I need to set priority, If device on 1st floor must connect to AP 1st floor. but not fix AP because if some AP down all device can connect to another AP floor.

Can I configure on Cloud?

Ruijie cloud
AP720-L

Author: chenzixuan3@rui Time: 2023-3-1 10:38
Dear sir

You can create different sub-projects for different floors on the Cloud, then put the APs of different floors into the corresponding sub-project, and create the SSID of each floor in the sub-project

Author: sonkub00@gmail. Time: 2023-3-1 14:58
Edited by Nattawut Teerajarukul at 2023-3-1 15:01

GTAC-Joy replied at 2023-3-1 10:38
Dear sir

You can create different sub-projects for different floors on the Cloud, then put the APs ...

finally, your solution is separate SSID of each floor, right?
I need signel SSID and all device can connect to all AP, but they must connect to priority AP of each device.
why I don't want to separate SSID, because I need to redundant AP if some AP fail all device can connect to another AP.

Or can I set limited RSSI? example I have AP1 and AP2 and deviceA. If deviceA connect to AP1 with RSSI -75. AP1 will roaming deviceA to AP2.

Author: chenzixuan3@rui Time: 2023-3-3 09:33

Nattawut Teerajarukul replied at 2023-3-1 14:58
GTAC-Joy replied at 2023-3-1 10:38
Dear sir

Dear sir

You can check the following link to configure RSSI
https://community.ruijienetworks.com/forum.php?mod=viewthread&tid=4920&extra=page%3D1

Welcome to Ruijie Community (https://community.ruijienetworks.com/)