Ruijie Community

Title: How to adjust the beacon cycle of Ruijie AP? [Print this page]

Author: GTAC-Sophia Time: 2023-4-14 16:24
Title: How to adjust the beacon cycle of Ruijie AP?
Fit AP(Enter the following command on AC):

AC#configure terminal

AC(config)#ap-config AP1

AC(config-ap)#beacon period 300 radio 1

----->Configure the Beacon frame periodof radio 1 to 300ms, the default is 100ms

AC(config-ap)#end

AC#wirte

Fat/MACC AP:

Ruijie#configure terminal

Ruijie(config)#interface dot11radio 1/0

Ruijie(config-if-Dot11radio 1/0)#beacon period300

----->Configure the Beacon frameperiod of radio 1 to 300ms, the default is 100ms

Ruijie(config-if-Dot11radio 1/0)#end

Ruijie#write

Welcome to Ruijie Community (https://community.ruijienetworks.com/)