Ruijie Community

Title: How to adjust the beacon cycle of Ruijie AP? [Print this page]

Author: GTAC-Sophia    Time: 2023-5-24 20:30
Title: How to adjust the beacon cycle of Ruijie AP?
You can adjust the beacon cycle of Ruijie AP withthe following command
Fit AP(Enter the following command on AC):

AC#configure terminal  

AC(config)#ap-config AP1  

AC(config-ap)#beacon period 300 radio 1   ----->Configure the Beacon frame periodof radio 1 to 300ms, the default is 100ms

AC(config-ap)#end

AC#wirte

Fat/MACC AP:

Ruijie#configure terminal

Ruijie(config)#interface dot11radio 1/0



Ruijie(config-if-Dot11radio 1/0)#beacon period300   
----->Configure the Beacon frame period of radio 1 to 300ms, the default is 100ms

Ruijie(config-if-Dot11radio 1/0)#end

Ruijie#write







Welcome to Ruijie Community (https://community.ruijienetworks.com/) Powered by Discuz! X3.2