Ruijie Community

Title: How to check the PoE status of Reyee NBS series switches? [Print this page]

Author: GTAC-Sophia Time: 2023-5-25 13:26
Title: How to check the PoE status of Reyee NBS series switches?
When you login to the Eweb of Reyee NBS series switches, you can check the PoE status by following these steps:
1.Enter this page: [More] > [Ports] >[PoE]

2.You can check the global PoE information on the PoE Overview part.

3.Scroll down, you can check the Port PoEInformation on the Port List part .

Author: na_grow@yahoo.c Time: 2023-5-25 16:31
Edited by LORDBYAKU at 2023-5-25 16:32

Hello Sophia,
what about difference of Priority? and when we should change it?

Author: GTAC-Jayden Time: 2023-5-25 16:47

LORDBYAKU replied at 2023-5-25 16:31
Hello Sophia,
what about difference of Priority? and when we should change it?

Dear sir,

The power supply priority of the port is divided into three levels: High, Medium, and Low
In auto and energy-saving modes, ports with high priorities are powered first. When the system power of the PoE
device is insufficient, ports with low priorities are powered off first.
Ports with the same priority are sorted by the port number. A smaller port number indicates a higher prior.

Best regards,
Jayden

Author: na_grow@yahoo.c Time: 2023-5-25 17:15

GTAC-Jayden replied at 2023-5-25 16:47
Dear sir,

The power supply priority of the port is divided into three levels: High, Medium, and L ...

that's great, thank for your information Jayden

Welcome to Ruijie Community (https://community.ruijienetworks.com/)