Ruijie Community

Title: How to configure switchover of the AC/AP O/E multiplexing interface [Print this page]

Author: admin Time: 2018-4-9 10:15
Title: How to configure switchover of the AC/AP O/E multiplexing interface
How to configure switchover of the AC/AP O/E multiplexing interface

Author: admin Time: 2018-4-9 10:15

1. On AP:

Ruijie(config)#interface gigabitEthernet0/1

Ruijie(config-if-GigabitEthernet 0/1)#media-type baset ---->Enable theelectrical interface.

Ruijie(config-if-GigabitEthernet0/1)#media-type basex ---->Enable the optical interface.

2. On AC:

Ruijie(config)#interfacegigabitEthernet 0/1

Ruijie(config-if-GigabitEthernet0/1)#medium-type copper

Ruijie(config-if-GigabitEthernet0/1)#medium-type fiber

Ruijie(config-if-GigabitEthernet0/1)#end

Ruijie#write

Welcome to Ruijie Community (https://community.ruijienetworks.com/)