Title: How to change WAN to lan from cli about Ruijie EG? [Print this page] Author: GTAC-Sophia Time: 2023-6-27 11:31 Title: How to change WAN to lan from cli about Ruijie EG? The command is as follows:
EG#conf t
EG(config)# specify interface GigabitEthernet 0/0lan
EG(config)# specify interface GigabitEthernet 0/1 wan
EG(config)#end
EG(config)#write
Note: After the configuration, save the configuration and restart the device. If the configuration is not saved, restart and restore the original configuration, you are advised to avoid peak hours.
Welcome to Ruijie Community (https://community.ruijienetworks.com/)