Ruijie Community

Title: How to configure the PPPoE server global settings on Reyee EG? [Print this page]
Author: GTAC-Sophia    Time: 2023-6-27 20:36
Title: How to configure the PPPoE server global settings on Reyee EG?
Overview
Point-to-Point Protocol over Ethernet (PPPoE) is a network tunneling protocol that encapsulates PPP frames inside Ethernet frames. When the router functions as a PPPoE server, it provides the access service to LAN users and supports bandwidth management
Global Settings


3. Set PPPoE Server to Enable and configure PPPoE server parameters.






PPPoE server configuration
Parameter
Description
PPPoE Server
Specify whether to enable the PPPoE server function.
Mandatory PPPoE Dialup
Specify whether LAN users must access the Internet through dialing.
Local Tunnel IP
Set the point-to-point address of the PPPoE server.
IP Range
Specify the IP address range that can be allocated by the PPPoE server to authenticated users.
VLAN
Set the VLAN of the current PPPoE server.
Primary/Secondary DNS Server
Specify the DNS server address delivered to authenticated users.
Unanswered LCP Packet Limit
When the number of LCP packets not answered in one link exceeds the specified value, the PPPoE server automatically disconnects the link.
Auth Mode
Select at least one authentication mode from the following: PAP, CHAP, MSCHAP, and MSCHAP2.

2. Configure the settings as appropriate. And check the tips carefully. You can click 'Help' on the right to learn what each parameter is for.



3.After you are done with the configuration, please click 'Save' to make it work. And then your Reyee EG will work as a PPPoE server.



Configuring a PPPoE User Account

Choose One-Device > Gateway >
Config > Advanced
 > PPPoE Server > Account Settings.
Click Add to create a PPPoE authentication user account. The currently created PPPoE authentication user accounts are displayed in the Account List section. Find the target account and click Edit to modify the account information. Find the target account and click Delete to delete the account.

Configuring a PPPoE User Account

Choose One-Device > Gateway >
Config > Advanced
 > PPPoE Server > Account Settings.
Click Add to create a PPPoE authentication user account. The currently created PPPoE authentication user accounts are displayed in the Account List section. Find the target account and click Edit to modify the account information. Find the target account and click Delete to delete the account.



Table 3-32

PPPoE user account configuration
Parameter
Description
Username/Password
Set the username and password of the authentication account for Internet access through PPPoE dialing.
Expire Date
Set the expiration date of the authentication account. After the account expires, it can no longer be used for Internet access through PPPoE authentication.
Remark
Enter the account description.
Status
Specify whether to enable this user account. If the account is disabled, the account is invalid and cannot be used for Internet access through PPPoE authentication.
Rate Limiting
Specify whether to apply flow control on the account. If flow control is enabled, you need to configure flow control policies for the PPPoE authentication user. If smart flow control is disabled, Rate Limiting must be turned off. To turn on Rate Limiting, enable smart flow control first.
Account Management
After flow control is enabled, you need to configure a flow control package for the current account to restrict user bandwidth accordingly. For details on how to configure and view flow control packages, see
Section


3.13.4
Configuring a Flow Control Package
.


Author: icantsleep    Time: 2024-2-10 09:09
hi, for startup ISP with 100+ clients and growing what Ruijiee Device is recommended? this is my current topology.
using EG305 with max 128 pppoe clients.
I have rb5009 as my pppoe authenticator, I would like to go ruijiee alone, if possible.



Author: guominxiang@rui    Time: 2024-2-10 13:30
icantsleep replied at 2024-2-10 09:09
hi, for startup ISP with 100+ clients and growing what Ruijiee Device is recommended? this is my cur ...

You can find out how many users each model or series of AP supports in this post.
https://community.ruijienetworks.com/forum.php?mod=viewthread&tid=2608&page=1&extra=#pid4255

Specific product recommendations need to be recommended according to the needs of field deployment and network, you can contact our company's pre-sales

Author: admin    Time: 2024-2-28 11:38
Good!




Welcome to Ruijie Community (https://community.ruijienetworks.com/) Powered by Discuz! X3.2