Title: How to adjust the beacon cycle of Ruijie AP? [Print this page] Author: GTAC-Sophia Time: 2023-6-27 20:41 Title: How to adjust the beacon cycle of Ruijie AP? You can adjust the beacon cycle of Ruijie AP withthe following command
Fit AP(Enter the following command on AC):
AC#configure terminal
AC(config)#ap-config AP1
AC(config-ap)#beacon period 300 radio 1 ----->Configure the Beacon frame periodof radio 1 to 300ms, the default is 100ms
AC(config-ap)#end
AC#wirte
Fat/MACC AP:
Ruijie#configure terminal
Ruijie(config)#interface dot11radio 1/0
Ruijie(config-if-Dot11radio 1/0)#beacon period300 ----->Configure the Beacon frame period of radio 1 to 300ms, the default is 100ms
Ruijie(config-if-Dot11radio 1/0)#end
Ruijie#write
Welcome to Ruijie Community (https://community.ruijienetworks.com/)