Title: How to change port rate and duplex mode on Ruijie Series Switch? [Print this page] Author: GTAC-Sophia Time: 2023-7-11 18:16 Title: How to change port rate and duplex mode on Ruijie Series Switch? Changethe port rate：
Ruijie>enable
Ruijie#configure terminal
Ruijie(config)#int gigabitEthernet 0/24
Ruijie(config-if-GigabitEthernet 0/24)#speed1000 ---Change the port rate to 1000M
Ruijie(config-if-GigabitEthernet 0/24)#speed100 ---Change the port rate to 100M
Ruijie(config-if-GigabitEthernet 0/24)#speedauto ---Change the port rate to auto negotiate
Ruijie(config-if-GigabitEthernet 0/24)#end
Ruijie#write Changethe deplex mode：
Ruijie>enable
Ruijie#configure terminal
Ruijie(config)#int gigabitEthernet 0/24
Ruijie(config-if-GigabitEthernet 0/24)#duplexfull ---Change the mode to full duplex
Ruijie(config-if-GigabitEthernet 0/24)#duplexhalf ---Change the mode to half duplex
Ruijie(config-if-GigabitEthernet 0/24)#duplexauto ---Change the mode to auto
Ruijie(config-if-GigabitEthernet 0/24)#end
Ruijie#write Confirmation command:
Ruijie#show interfaces status
Welcome to Ruijie Community (https://community.ruijienetworks.com/)
