Ruijie Community

Title: How to login to Ruijie EG web locally? [Print this page]

Author: jmccandles    Time: 2023-8-26 19:54
Are there any specific router ports that we have to use.



Author: GTAC-Jayden    Time: 2023-8-26 20:08
  replied at 2023-8-26 19:54
Are there any specific router ports that we have to use.

Dear sir,

You can access the Ruijie EG web by searching IP address of the LAN interface, WAN interface, or management interface of the EG router in the address bar of the browser. By default, the MGMT port will have the 192.168.1.1 IP address.

Best regards
Jayden

Author: jmccandles    Time: 2023-8-26 20:29
GTAC-Jayden replied at 2023-8-26 20:08
Dear sir,

You can access the Ruijie EG web by searching IP address of the LAN interface, WAN inte ...

Thanks Jayden,
And if we want to bring gateway to cloud a cable internet connection to any other ports accept management needs to be done, or we need to connect to management port only.


Author: GTAC-Jayden    Time: 2023-8-26 21:01
  replied at 2023-8-26 20:29
Thanks Jayden,
And if we want to bring gateway to cloud a cable internet connection to any other p ...

Dear sir,

For device to be accessible from cloud, it needs to have an internet connection.

Best regards,
Jayden

Author: jmccandles    Time: 2023-8-26 21:02
GTAC-Jayden replied at 2023-8-26 21:01
Dear sir,

For device to be accessible from cloud, it needs to have an internet connection.

The internet connection needs to be from WAN ports or Management port or any other default LAN ports.


Author: GTAC-Jayden    Time: 2023-8-26 21:07
  replied at 2023-8-26 21:02
The internet connection needs to be from WAN ports or Management port or any other default LAN por ...

Dear sir,

The internet connection should be connected to the WAN ports.

Best regards,
Jayden

Author: jmccandles    Time: 2023-8-26 22:08
GTAC-Jayden replied at 2023-8-26 21:07
Dear sir,

The internet connection should be connected to the WAN ports.

Can  LAN ports in EG perform routing, we are connecting EG to Ruijie L3 switch(Routed port). we are trying to connect one port from EG to Ruijie L3 (P 24) which has been configured as routing port. The dillema i am facing is while definiing WAN port for P2P with Ruijie L3 it prompts me for gateway IP address.


Author: GTAC-Jayden    Time: 2023-8-28 09:22
  replied at 2023-8-26 22:08
Can  LAN ports in EG perform routing, we are connecting EG to Ruijie L3 switch(Routed port). we ar ...

Dear sir,

Yes, the LAN ports can perform routing. You can refer to page 147 of the following link to a web-based configuration guide on how to configure static routes.
https://www.ruijienetworks.com/resources/preview/ruijie-reyee-rg-eg-series-gateways-web-based-configuration-guide-B16




Best regards,
Jayden





Welcome to Ruijie Community (https://community.ruijienetworks.com/) Powered by Discuz! X3.2