Ruijie Community

Title: How to configure IP Source Guard on Ruijie AP ? [Print this page]

---

Author: linyonghang1@ru    Time: 2023-8-7 15:42
Title: How to configure IP Source Guard on Ruijie AP ?
Before configuring IP Source Guard, you need to enable the DHCP snooping function. You can configure it according to the following commands

>enable

#config

(config)#ip dhcp snooping

(config)#interface gigabitEthernet 0/1

(config-if-GigabitEthernet 0/1)# ip dhcp snooping trust

(config-if-GigabitEthernet 0/1)#exit

(config)#interface Dot11radio 1/0

(config-if-Dot11radio 1/0)#arp-check

(config-if-Dot11radio 1/0)#ip verify source port-security

(config)#interface Dot11radio 2/0

(config-if-Dot11radio 2/0)#arp-check

(config-if-Dot11radio 2/0)#ip verify source port-security

---

Welcome to Ruijie Community (https://community.ruijienetworks.com/)

Powered by Discuz! X3.2