Ruijie Community

Title: Three Devices Using the RGOS 11.X Software Platform Are Used to Create a VSU. What Are Differences Between the VSL Configuration and That on Devices Using the RGOS 10.X Software Platform? [Print this page]

Author: admin Time: 2017-5-3 16:37
Title: Three Devices Using the RGOS 11.X Software Platform Are Used to Create a VSU. What Are Differences Between the VSL Configuration and That on Devices Using the RGOS 10.X Software Platform?
Three Devices Using the RGOS 11.X Software Platform Are Used to Create a VSU. What Are Differences Between the VSL Configuration and That on Devices Using the RGOS 10.X Software Platform?

Author: admin Time: 2017-5-3 16:37

Configuration Differences

11.x

vsl-port

port-member interface tenGigabitEthernet 1/1

port-member interface tenGigabitEthernet 1/2

10.x

vsl-aggregateport 1

port-member interface tenGigabitEthernet 1/1 fiber

vsl-aggregateport 2 //Add the link used for interconnecting to another device to another aggregate group.

port-member interface tenGigabitEthernet 1/2 fiber

Principle Analysis

For devices using the RGOS 10.X software platform, specified ports of different devices need to be added to an aggregate group, and connection errors may occur in this case. Improvements are made to devices using the RGOS 11.X software platform and only ports need to be added to one resource pool. Then, the software automatically negotiates to add them to an aggregate group, without manual intervention.

Welcome to Ruijie Community (https://community.ruijienetworks.com/)