Title: How to configure Access Threshold and Response RSSI Threshold for Reyee APs? [Print this page] Author: linyonghang1@ru Time: 2023-8-8 15:49 Title: How to configure Access Threshold and Response RSSI Threshold for Reyee APs? Access Threshold:
When the client's RSSI is lower than the threshold, it will fail to discover and connect the device.
Response RSSI Threshold:
When the client's RSSI is lower than the threshold, it will fail to discover the wireless signal broadcast by the device.
Tip: A smaller threshold indicates less interference from environmental factors on APs, but may affect client connection to services.
Configuring Access Threshold:
For RG-RAP2260(G), RG-RAP2260(E), RG-RAP6260(G), RG-RAP6262(G), RG-RAP2260(H),
RG-RAP6260(H), RG-RAP2266, RG-RAP2260 and RG-RAP6262 models.
Configure the master device.
Choose Network ( WLAN) > Radio Frequency
Configure the slave device.
Choose Devices > Select the target device in the device list and click SN > More > WLAN > Radio Frequency
For other RAP models.
Configure the master device.
Choose WLAN > Radio Frequency
Configure the slave device.
Choose WLAN > APs > Select the target device in the device list and click
Manage > WLAN > Radio Frequency
When the wireless signal of the end user is lower than the access threshold set on the device, the client cannot
detect the wireless signal of the device. After adjusting the configuration, click Save.
Configuring Response RSSI Threshold:
The configuration steps are totally the same as Access Threshold for RG-RAP2260(G), RG-RAP2260(E), RG-RAP6260(G), RG-RAP6262(G), RG-RAP2260(H), RG-RAP6260(H), RG-RAP2266, RG-RAP2260 and RG-RAP6262 models and other models. The Response RSSI Threshold bar follows the Access Threshold bar.
When the wireless signal of the end user is lower than the response RSSI threshold configured on the device,
the client cannot detect the wireless signal of the device. The smaller the response RSSI threshold is configured, the less environmental factors interfere with the AP. However, the connection of the client may be affected.
After adjusting the configuration, click Save.
Welcome to Ruijie Community (https://community.ruijienetworks.com/)
