Ruijie Community

Title: How to recover Ruijie EG firmware under boot ? [Print this page]

Author: linyonghang1@ru Time: 2023-8-9 17:02
Title: How to recover Ruijie EG firmware under boot ?
1. Ensure you connect to the Ruijie EG in the following steps

Note: If the primary process of the device is lost for some reason, try to restore it by using the ctrl layer. Main process loss will result in the PWR and SYS lights always on, but other port lights are not.

2. Download the main process from our official website：

https://www.ruijienetworks.com/support

3. Change file name as ‘rgos.bin’， run TFTP server, and choose file location.

4. Open PUTTY, turn off power then turn on. Input ‘CTRL+C’ in PUTTY consecutively until the following menu appears

5. Input ‘0’ behind the prompt ‘Press a key to run the command’.

6. Then input ‘1’ behind the prompt ‘Press a key to run the command’. Input ‘y’ behind the prompt ‘Determined to upgrade?’ .

7. Press ‘CTRL+Z‘back to the upper menu. Input ‘2’ behind the prompt ‘Press a key to run the command’ to restart and load the main process.

8. You could access the WEB interface to confirm if it is successful.

Welcome to Ruijie Community (https://community.ruijienetworks.com/)