Ruijie Community

Title: How to activate internal antennas of AP680(CD)? [Print this page]

Author: linyonghang1@ru Time: 2023-8-10 13:59
Title: How to activate internal antennas of AP680(CD)?
You can follow these steps to activate internal antennas of AP680(CD)：

1.Login to the CLI of AP680(CD) and check if the external antenna is enabled or not under radio ports.

2.If external antenna is enabled, please use these CLI commands to turn it off, then internal antenna will be enabled:

Ruijie(config)# interface Dot11radio 1/0

Ruijie(config-if-Dot11radio 1/0)#no external-antenna enable

Ruijie(config-if-Dot11radio 1/0)#end

Ruijie#wr

Note:

The same radio port can only work in the internal antenna or external antenna state.

After switching to the external antenna, the internal antenna will be disabled.

Welcome to Ruijie Community (https://community.ruijienetworks.com/)