Ruijie Community

Title: How to log in to the AP180 device management GUI [Print this page]

Author: jiang5@ruijie.c Time: 2023-8-28 15:03
Title: How to log in to the AP180 device management GUI
The initial management IP of AP180 is 192.168.110.1, but once connected to the network, the initial IP will be obtained through DHCP and then changed, so as a user if you want to modify the configuration of AP180, how to log in to the management GUI of the AP.

Author: chenzixuan3@rui Time: 2023-8-28 16:35
Dear sir
You can log in to the AP through the console or check the obtained ip address on the gateway device according to the MAC address of the AP.

Author: jiang5@ruijie.c Time: 2023-8-29 08:42

GTAC-Joy replied at 2023-8-28 16:35
Dear sir
You can log in to the AP through the console or check the obtained ip address on the gatew ...

As a user I don't have a console line and I don't have permission to log in to the gateway device, how can I know the management IP and log in to the AP to change some config.

Welcome to Ruijie Community (https://community.ruijienetworks.com/)