Title: CAPTIVE PORTAL [Print this page] Author: ricardojaime95@ Time: 2023-9-17 03:27 Title: CAPTIVE PORTAL I set up a new VLAN for LAN 1 port and it will be authenticated by captive portal. Can I edit the ip range for this? If an ip camera is connected to this network it won't need any authenitcation. I need change 192.168.2.2-192.168.2.254 to 192.168.2.6-192.168.2.254, is that possible?
Author: yujiamin@ruijie Time: 2023-9-17 10:35
Dear sir
You can add the corresponding IP addresses to the whitelist here so that the IP camera can connect to the Internet directly without authentication.
Best regards
Jenny
Welcome to Ruijie Community (https://community.ruijienetworks.com/)
