Ruijie Community

Title: bypassing one subnet from ACL [Print this page]

Author: publictoiletbow Time: 2023-10-20 14:13
Title: bypassing one subnet from ACL
hi
im new here we have a new [strong]NBR6210-E [/strong]im not familiar in rujie stuff but i came from other brands like pfsense and im just wondering how to bypass one subnet from ACL it would pass the traffic to external without filtering thru ACL.

thank

Author: yujiamin@ruijie Time: 2023-10-20 14:27
Dear sir

You can add permit rule on the ACL so that the traffic will be allowed to pass through the device which have configured ACL. Here is the guide to configure ACL on the NBR router: https://community.ruijienetworks.com/forum.php?mod=viewthread&tid=1905

Best regards
Jenny

Author: publictoiletbow Time: 2023-10-20 15:09

GTAC-Jenny replied at 2023-10-20 14:27
Dear sir

You can add permit rule on the ACL so that the traffic will be allowed to pass through the ...

hi thanks on this

Author: publictoiletbow Time: 2023-10-21 10:32
Edited by publictoiletbowl at 2023-10-21 10:41

GTAC-Jenny replied at 2023-10-20 14:27
Dear sir

You can add permit rule on the ACL so that the traffic will be allowed to pass through the ...

hi jenny
need your assistance here
i have two subnet 100.0/24 and 101.0./26 and the client pc from 100.2 cant ping to 101.11 i add new acl all permit as a test allow all and in interface access i add inbound to Gi0/1.2 which 101 belong to this vlan did i missed something here? thanks

Author: publictoiletbow Time: 2023-10-21 11:54

publictoiletbowl replied at 2023-10-21 10:32
GTAC-Jenny replied at 2023-10-20 14:27
Dear sir

please ignore this reply of mine it works now

Welcome to Ruijie Community (https://community.ruijienetworks.com/)