Ruijie Community

Title: how to create trunk port as lan port 1 [Print this page]

Author: ithelpdesk@alna Time: 2023-10-24 18:03
Title: how to create trunk port as lan port 1
dear sir ,i have RG-NBR6205 E device and i will use it as wifi controller ,so my internet link connect on wan port and on lan port 1 i want to configure multiple vlan ,please sugest what i do for it .becuse there is no any option of make lan port to trunk port . <img alt="image.png" src="data/attachment/forum/202310/24/180335fz4gpx0xfh4xgwpi.png" width="1035" height="412">

Author: yujiamin@ruijie Time: 2023-10-24 18:16
Dear sir

You can create multiple vlan on the NBR router by creating sub interfaces on the following page, then you can encapsulate the corresponding vlan on it:

Best regards
Jenny

Author: ithelpdesk@alna Time: 2023-10-24 19:08

GTAC-Jenny replied at 2023-10-24 18:16
Dear sir

You can create multiple vlan on the NBR router by creating sub interfaces on the following ...

is it possible without make this lan port as trunk port all the vlan will be communicate ??
i have vlan 100 .vlan 200,vlan 300

so please suggest which vlan ip i need to configure on lan0 port and what vlan i need to create

Author: chenchunyan@rui Time: 2023-10-24 21:25

Sanjay Malik replied at 2023-10-24 19:08
is it possible without make this lan port as trunk port all the vlan will be communicate ??
i have ...

Dear,
You can configure bridge mode on the NBR. The link is the guide, please refer to it from the page 53.
Ruijie Reyee RG-NBR Series Routers Web-based Configuration Guide, RGOS 11.9(6)B15 (V1.1) - Ruijie Networks

Have a nice day!

Welcome to Ruijie Community (https://community.ruijienetworks.com/)