Ruijie Community

Title: I Wanted to Know will line card work as supervised engine and what about it ports? [Print this page]

Author: muhammad.ahmed6 Time: 2023-11-6 15:16
Title: I Wanted to Know will line card work as supervised engine and what about it ports?
I am using RG-NBS7003, as a line card and i\I wanted to make it as a supervised engine, but the confusion is what about its ports will it travel data or not, Kindly tell me about the ports of it, what will it do?

Author: GTAC-Jayden Time: 2023-11-6 16:30
Dear Muhammad Ahmed,

On NBS7003, the line card inserted into only slot 1 will work as the supervisor engine. Please note you need to insert a line card to slot 1 as the supervisor engine in order for the chassis switch to work, if you only insert a line card to slot 2 or 3, there will be no supervisor engine and the switch will not work. The line card inserted into slot 1 can still forward data on its ports.

Best regards,
Jayden

Author: muhammad.ahmed6 Time: 2023-11-6 16:51

GTAC-Jayden replied at 2023-11-6 16:30
Dear Muhammad Ahmed,

On NBS7003, the line card inserted into only slot 1 will work as the superviso ...

Yes i have inserted at slot 1 , the question is when line card inserted at slot 1 working as a supervised engine, what about it ports, what function will they perform?

Author: GTAC-Jayden Time: 2023-11-6 17:02

Muhammad Ahmed replied at 2023-11-6 16:51
Yes i have inserted at slot 1 , the question is when line card inserted at slot 1 working as a sup ...

Dear Muhammad Ahmed,

The ports will work as normal switch ports.

Best regards,
Jayden

Welcome to Ruijie Community (https://community.ruijienetworks.com/)