Symptom: When a user logs in to the S2928G-12P from the Web page, a prompt, indicating the username and password are incorrect, is displayed.
Solution:
3. Check the username and password and ensure that the user level is set to 15.
username admin password ruijie
username admin privilege 15
4. Configure the HTTP service and authentication mode.
enable service web-server http
enable service web-server https
ip http authentication local
5. If the user still fails to log in, the fault may be caused by browser incompatibility. Upgrade the firmware or enable the compatibility mode of the Internet Explorer.
Problem firmware：RGOS 10.4(2b12)p2 Release(180357)
Fixed firmware：RGOS 10.4(2b12)p6 Release(196987)